Is water bad for skateboard wheels? This is a question that many skateboarders have, especially those who live in areas with a lot of rain or humidity. While it's true that water can damage skateboard wheels, there are some ways to avoid this.
%20(1).jpg "Is water bad for skateboard wheels")
What is the main
difference between a soft wheel and a hard wheel?
A soft wheel is softer than a hard wheel. When you use
a soft wheel, it will feel comfortable in the hands and easy to control. When
you ride a hard wheel, the friction between the wheel and the ground increases
the pressure of the wheel, so the rider can easily feel the resistance of the
road.
The reason is that when you are learning to ride a
skateboard, you will be more likely to fall off if the wheels are too big.
On the contrary, if you are a more experienced skater, it
is better to choose a large-sized wheel.
In this case, the larger wheel is better for the grip.
And of course, when choosing the size of the wheel, you
should also consider the length of the skateboard. The wheel with a high
hardness has a lower friction coefficient. It is suitable for long-distance
riding and on rough terrain. The wheel with low hardness is very soft and can
withstand small bumps. This is the best choice for beginners.
What are skateboard wheels made
of?
They are usually made of plastic, polycarbonate, nylon,
or a combination of these materials. Water is actually a good lubricant. However,
if it gets inside a wheel, it will absorb the plastic inside the wheel, making
it weak.
How do you know whether the wheel has been damaged because
of water or not? One way to tell if the wheel has been damaged is to look at it
closely. If the plastic around the wheel has cracked, it means that the wheel
was exposed to water for a long time. If you look carefully at the wheel,
you'll see that the wheels are covered with plastic.
If the wheel is not damaged, it might be because the wheel
was exposed to air for a long time. In this case, there is a thin layer of
plastic film on the wheel.
So the answer is: If you see any cracks on your skateboard
wheel, you should immediately remove the wheel from use and replace it with
another one.
Water can damage skateboard wheels, causing them to wear out faster.
How water affects skateboard
wheels
One potential issue with water and skateboard wheels is the risk of rust. If water is allowed to sit on the metal components of a skateboard, such as the bearings or axles, it can cause rust to form. Rust can cause the skateboard to become less smooth and more difficult to ride, and it can also weaken the metal components and make them more prone to breakage. To prevent rust from forming on your skateboard wheels, it is important to dry them off after they have been exposed to water and to store the skateboard in a dry place.
Another factor to consider is the effect of water on the grip of skateboard wheels. Some types of skateboard wheels are made of a softer material, such as polyurethane, which can become slippery when wet. This can make it more difficult to ride on wet surfaces and increase the risk of accidents. Harder skateboard wheels, on the other hand, are less prone to slipping on wet surfaces, but they may not provide as much grip as softer wheels.
It is also important to consider the quality of the water that your skateboard wheels are coming into contact with. If the water is dirty or contaminated, it can affect the performance of the wheels. For example, if the water contains sand or grit, it can wear down the wheels more quickly.
Despite these potential issues, it is not necessarily bad for skateboard wheels to come into contact with water. In fact, skateboard wheels are designed to withstand a certain amount of water and other elements. As long as you take care to dry off your skateboard wheels and store them in a dry place, they should be able to withstand occasional exposure to water without any problems.
In conclusion, water is not inherently bad for skateboard wheels, but there are a few factors to consider when it comes to the effects of water on skateboard wheels. To ensure that your skateboard wheels are in good condition and perform optimally, it is important to dry them off after they have been exposed to water and to store the skateboard in a dry place. It is also important to consider the quality of the water that your skateboard wheels are coming into contact with and to choose wheels that are appropriate for the conditions you will be riding in. So, it is always better to take proper care of your skateboard wheels to make them last longer
Effect of Water on the
Material of the Wheels
The material of skateboard wheels is typically
polyurethane. Polyurethane is a type of plastic that is made from petroleum.
When water comes into contact with polyurethane, it can cause the material to
swell, soften, and break down. This can lead to the deformation of the wheels
and decreased performance. In addition, water can also cause the bearings to
rust.
Water can shorten the
skateboard wheel's lifespan
Water can shorten the skateboard wheel's lifespan by
causing the bearings to rust. This is because water creates an ideal
environment for rust to form, and skating in wet conditions can cause the
wheels to come into contact with water more often. If you notice your wheels
beginning to show signs of rust, it's best to replace them as soon as possible
to avoid further damage.
Water can cause skateboard
wheels to wear faster
Water can cause skateboard wheels to wear faster because the water can act as an abrasive and cause the wheels to break down. Additionally, when water gets on the bearings it can cause them to rust and seize up.